手机版 |
产品分类 |
光学仪器及设备
DRV-Z1人机工效学全高清FHD裸眼3D变倍观察
美国SONIX超声显微镜ECHO VS
发射扫描电子显微镜ReguluS
扫描电子显微镜FlexSEM 1000
扫描电子显微镜AeroSurf 15
场发射透射电子显微镜HF-3300
透射电子显微镜HT7800系列
球差校正扫描透射电子显微镜HD-2700
离子溅射仪MC1000
场发射扫描电镜热场式SU5000
测量/计量仪器
2D大视场测量显微镜TVM35
高精度光学测量显微镜Hawk Elite
工具测量显微镜Swift Pro Elite
尼康CNC影像测量VMZ-R3020
德国Werth三坐标测量机
Werth台式复合式光学三坐标测量机VideoCheck-IP
Werth台式复合式光学三坐标测量机ScopeCheck
Werth双频白光干涉白点测量传感器WIP
Werth自动寻边的测量机EasyScope 3D man
Werth高精度复合式光学三坐标VideoCheck IP Basic
制样/消解设备
Allied楔形电子显微镜制样夹具
Allied手工样品固定器
Allied自动磨抛机E-PREP 4™ (PH-4I™ )
Allied自动研磨抛光机MetPrep 3™
Allied自动研磨抛光机MetPrep
Allied自动注液机AD-5™
Allied双盘手动磨抛机TwinPrep 5™
Allied手动研磨抛光机MetPrep 1™
Allied手动研磨抛光机M-Prep 5™
Allied基材厚度测量仪X-PREP® VISION™
无损检测/无损探伤仪器
Werth计量型CT TomoScope L
Werth计量型CT TomoScope S
Werth计量型CT TomoScope S HA
Werth计量型CT TomoScope XL
Werth计量型CT TomoScope XL NC
Werth计量型CT TomoScope XS
尼康CT扫描工作站XTH450
尼康CT扫描工作站XTH225
尼康CT扫描工作站XTH320 LC
尼康X射线检测站XTV160
半导体行业专用仪器
化学开封机Elite Etch Cu ESD 7200
化学芯片开封机Elite Etch Cu 7100
化学芯片开封机Injector 7400
化学芯片开封机Mega Etch 7300
Nisene化学芯片开封机TotalProtect
Nisene化学芯片开封机JetEtch Pro
激光单粒子效应SEE测试仪
Nisene化学芯片开封机CuProtect
Nisene等离子芯片开封机PlasmaEtch
化学芯片开封机Elite Etch 7000
其他
布洛维通用硬度计DuraVision G5
洛式硬度计DuraJet G5
全自动显微维氏硬度计DuraScan G5
便携式齿轮洛式硬度计N7
便携式深孔内径硬度计N6P
相关仪表
Aberlink-Trimos关节臂坐标测量机
联系方式 |
产品系列
The solution to silver wire decapsulation
The I53 Injector contains a 250 ml source bottle with double containment and leak detection. A single, small diameter, PTFE tube transfers the solution to the Elite Etch system. An injector block installed between the pump and heat exchanger of the Elite Etch and injects the solution into the acid stream. All components are PTFE, PCTFE, or borosilicate glass.
On an existing Elite Etch system, the I53 Injector can be easily installed using a new cable connected from the I53 to the Elite Etch. The existing handheld is now directly plugged into the I53 and does not require any special software for the etcher. The only modification to the etcher is the installation of the injector block and the routing of the solution tubing through the bottle box and into the I53.
When solution injection is selected from the handheld a set up cycle is initiated. This cycle fills the syringe pump and all of the tubing to, and including, the injector block. This cycle purges any excess solution to the waste bottle and prepares for etching with corrosion inhibiting solutions.
The injection of the inhibitor is initiated by selecting the appropriate operation recipe. The programming screen has a selection of the ratio with a range of 20:1 to 40:1. The injection ratio programmed applies to both etching and rinse. The syringe contains approximately 5 ml and the syringe and syringe plunger are easily replicable.
Specifications
Dimensions | Height: 230 mm (9 in) |
---|---|
Width: 230 mm (9 in) | |
Depth: 127 mm (5 in) | |
Weight | Approx. 16 kg (35 lb) |
Power Source | 90 to 250 VAC, 50 to 60 Hz (4 amp) |
Syringe Type | Hamilton gas tight 5 ml capacity |
Resolution | 0.1323 μl |
Cycle Volume | 0.0025 to 0.005 ml programmable |
Mix Ratio | 20:1 to 40:1 |
Dispense Accuracy | ±3%, ±0.14 μl |
Refill Cycle Time | 60 second maximum |
Source Bottle Size | 250 ml |
Compatibilities | Elite Etch 7000 |
Elite Etch Cu 7100 | |
Elite Etch Cu ESD 7200 | |
Mega Etch 7300 | |
Warranty | most comprehensive and inclusive warranty in industry (ask for full details) |